Fire season in the Cape & Workplace safety

Business owners in the Cape should heed warnings issued by environmental groups about the expected increased prevalence of fires in coming months. The warning comes as the province prepares for the start of the fire season, and follows a devastating fire on the slopes of Table Mountain earlier this year.

“Fire safety is a long-term investment that must be carefully planned to ensure the business’ continuity and ultimately to properly protect both people and property,” says Andrew Worthington, General Manager: Fidelity Fire Solutions, a division of Fidelity Services Group.

“There is a specific responsibility on businesses who are located close to green belts to put in the kind of preventative measures needed to ensure they are protected if any fires start close by.”

The environmental organisation Parkscape told local media (this week) that residents of Cape Town should be aware of the risk of veld fires this summer, following millions of rands worth of damage after a fire ripped through large tracts of land earlier this year.

Capetonians live and work in close proximity to several hectares of veld and national environment. Climate change, according to experts, could lead to warmer and drier summer seasons and an increased risk of runaway fires. ​

Office and building managers have a duty to ensure that staff members are properly protected by a fire alarm system that is regularly tested, and working in the way it should. ​ These systems require constant tests, maintenance and care, in the same way that any home security system should be tested and fixed, says Worthington.

“In fact, we recommend that these workplace systems be tested even more frequently than a home system would be checked, and this is even more crucial for any company or business that is located close to green belt areas.

“There is the obvious aspect that you have more foot traffic and more equipment at your place of work than at home, which requires more frequent testing of this important safety system.”

There are basic steps that any company or workplace can take today, to help protect staff and equipment from fires. Putting the proper preventative measures in place and generating a general staff awareness of fire risks and how to prevent these risks, he says, is a good first step to take.

“We also recommend that office and building managers carefully study the relevant occupational health regulations and legislation that is relevant to their industry as these might have additional measures that should be put in place,” says Worthington.

Other do’s and don’ts to consider are:

• Do test the system regularly. Keep a careful log of when the system was tested and by whom, as well as which parts of the system was tested (including the test outcome)
• Do make sure your staff know what to do when an alarm is triggered. Every workplace should have an evacuation plan in place, which is shared with team members and practised on a regular basis
• Do follow up on test errors. If your test showed a faulty sensor or any other technical problems, contact your service provider as a matter of urgency to have these addressed
• Do allocate more than one team member to your fire system’s testing routines. There is a risk involved in having only one person who knows how to properly test the fire alarm system
• Do test the fire alarms during normal office hours. Yes, this will be disruptive to normal operations but that is the intended purpose behind a fire alarm system. Testing it outside of office hours when there are no staff members around, defeats the purpose
• Do connect the fire alarm system to your monitoring system. If you haven’t asked your armed response company if they can also monitor your fire alarm system, then ask them today how you can set this up
• Don’t confuse testing the fire alarm with regular system maintenance or scheduled visits by your service provider. The test is intended to determine the system’s ability to register a fire and to alert you, while a maintenance visit will be done by your service provider who will focus on technical work or upgrades that might be required
• Don’t test the same part of your system every time. If possible, look at testing a different sensor or aspect of the system each time a test is conducted
• Don’t ever ignore potential workplace fire hazards. This includes overloaded power plugs, dust on your fire sensors, or the actions of staff members that can lead to fires such as cigarette butts dumped in trash cans

/ends

Issued on behalf of Fidelity Fire Solutions.